
European Bed Sizes vs Canadian: A Newcomer’s Guide
European, UK and Canadian bed sizes do not convert exactly, even when two names sound equivalent. Measure the mattress, frame and bedding in centimetres, then compare actual product dimensions rather than forcing imported sheets onto the nearest Canadian label.
Why the sizes do not line up
Canada commonly sells mattresses by names such as twin, double, queen and king, with dimensions often stated in inches. European markets commonly emphasize metric dimensions, and the UK uses familiar names with different measurements.
There is no single “European double.” A width-by-length number such as 160 × 200 cm is more useful than the word attached to it.
Asian markets also use varying national and brand standards. Avoid grouping an entire continent into one chart unless each listed size has a reliable source.
Frames and mattresses add another difference. A frame’s outside dimensions exceed the mattress, while an inset platform needs enough internal clearance without a large unsafe gap.
Conversion table
Mattress Dimensions in CM provides verified Canadian measurements. Bed Sizes in Canada explains the local names.
Measure what you brought
Remove sheets and measure the mattress itself from edge to edge. Record width, length and depth in centimetres without following piping or rounding to the nearest named size.
For a frame, measure the clear internal sleeping area and note corner brackets, lips or rounded corners. The outer frame measurement is useful for the room but not for mattress fit.
Measure fitted sheets unstretched from seam to seam and record pocket depth. Elastic makes fabric flexible, yet too much stretch can pull corners off or distort the fit.
For a duvet cover, measure the flat finished width and length. Pillow sizes and closures can differ too, so include them instead of buying a matching set by name.
Bedding you brought from home
A flat sheet and blanket can tolerate modest size differences better than a fitted sheet. A duvet cover may work with a slightly different insert, but excess fabric or bunching can affect comfort.
Do not use a fitted sheet that constantly releases, strains seams or interferes with an adjustable base. Replace it with bedding sized for the actual mattress.
Imported pillows may need their original cases. Compare finished dimensions and closure style before replacing them.
Keep favourite decorative textiles even if they do not fit the new mattress. A duvet cover can sometimes become a throw or stored keepsake without forcing an impractical bed choice.
Choosing a Canadian bed
Start with the sleepers, room and delivery route, then choose among locally available dimensions. Do not select a mattress only to rescue existing sheets if the bed is otherwise too large or small.
Tape the mattress footprint on the floor and add the frame’s outer dimensions. Leave room for doors, drawers, heat sources and a comfortable walking route.
Newcomer measurement checklist
- Record mattress width, length and depth in centimetres
- Measure the frame’s clear internal area
- Measure the frame’s outer room footprint
- Check fitted-sheet seams and pocket depth
- Measure duvet, cover and pillows separately
- Compare numbers, not translated size names
- Confirm Canadian product dimensions by model
- Check bedroom and delivery access
- Ask about custom sizing before altering a frame
Take the measurements with you when shopping and keep the original units beside any conversion. Rounding centimetres to inches too early can create a difference large enough to affect a fitted sheet or an inset frame. If two measurements are close, compare the supplier’s stated tolerance and the shape of the mattress corners. A paper note with width, length and depth is more reliable than remembering the overseas size name.
Measure again after the bed is assembled in Canada. Hardware, replacement slats or a centre support can slightly change the clear space inside an older frame. Check the corners as well as the middle, especially when the frame has curved upholstery or projecting brackets. The mattress should sit evenly without being squeezed between the rails.
Keep one copy of the measurements in your phone and another with the frame hardware. That record helps when replacing sheets, a protector or the mattress several years later.
FAQ
Is a 160 × 200 bed a Canadian queen?
Do not assume so. Compare the verified centimetre measurements of both mattresses; similar names or nearby dimensions do not guarantee frame or sheet fit.
Is a UK double the same as a Canadian double?
No assumption is safe from the name. Verify the UK mattress dimensions and compare them with the exact Canadian product.
Will European sheets fit a Canadian bed?
Flat sheets may be forgiving, but fitted sheets depend on width, length and pocket depth. Measure both before relying on them.
Can I buy a Canadian mattress for a European frame?
Only if the exact internal frame dimensions and support system match. Otherwise ask about a verified custom option or use a compatible Canadian frame.


































